● Made of High Density Polyethylene (HDPE) material
● Cabin volumes of different sizes and capacities (50 It - 1000 It),
● Compact system design that increases pump life and efficiency,
● Body with strength calculations according to the place of use,
● Panel with pressure-resistant hose and camlock connection for submersible pumps,
floater connection slots are ready,
● Integrated basket filter (twin body models only)
● Above ground or below ground installation possibility,
● It is the easiest and cost-efficient to install, maintain and operate compared to pumping
stations made of concrete.
● Highly resistant material against corrosive substances,
● Suitable for single or two pumps depending on cabin volume and pump size,
● Possibility of different connection diameters upon request

Usage areas

● Suyu bir yerden başka bir yere pompalamak için pompaları ve ekipmanlarını içeren bir sistemdir.
● Su temini, su ve atık su arıtma tesisleri ve kanalizasyon sistemleri gibi çeşitli sistemler için kullanılır.
●Betonarme gövdeli sistemlerdeki kurulum, bakım, işletme maliyetinden tamamen
kurtaran Paket Pompa İstasyonları, kompakt gövde tasarımı ile sahadaki inşaat işlerini
minimize ederken, işletim maliyetini düşürmektedir.

Usage places

● In the parking lots of buildings, restaurants and cafeterias where hygiene is required.
● Projects where manhole use is not suitable

BLACK BOX yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

Cast body, 1450 RPM, outlet diameter DN 50 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

DWWP C SERIES Cast Iron Body Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

DWWP GR Series Waste Water Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

DWWP C and C1 Series Closed Impeller Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

Cast body, 1450 RPM, outlet diameter DN 100 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

DWWP V Series Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

Cast body, 1450 RPM, outlet diameter DN 100 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

DWWP SS Series Complete Stainless Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

Cast body, 1450 RPM, outlet diameter DN 50 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

DWWP C1 SERIES Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

• DWWP D 18-2-Y-1,35 kw M type pumps are manufactured at 50 Hz and 60 Hz frequencies.
• These types of pumps are single-phase electric, easy to install, stainless body, automatic working, float drainage submersible pumps.

Usage Areas:

These pumps with an open impeller made of cast iron material are used in waterfalls, basements, ornamental pools, buildings, drainage pits and puddle waters up to a maximum height of 20 m. They discharge particles not exceeding 6 mm without problems.

DWWP D SERIES 18-2-Y-1,35 kw M Type Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

• DWWP D 15 - 1,1 kw M type pumps are manufactured at 50 Hz and 60 Hz frequencies.
• These types of pumps are single-phase electric, automatic portable, submersible pumps with floats that work in polluted waters.

Areas of Use:

This type of pump is used in the discharge of accumulated water up to a maximum height of 12 m, sewage water that does not exceed 20 mm, containing not very solid particles, industrial and household waste, rainwater; small diameter waterfalls for ornamental purposes.

DWWP D Series Stainless Impeller Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

Cast body, 2900 RPM, outlet diameter DN 50, shredder blade, and three-phase, centrifugal submersible waste water pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

DWWP GR SERIES Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.