Shop – Duyar Pompa https://duyarpompa.com/en/ Pompa, Hidrofor Wed, 10 Jul 2024 14:05:24 +0000 en-US hourly 1 https://duyarpompa.com/wp-content/uploads/2024/05/cropped-duyarpompa-32x32.png Shop – Duyar Pompa https://duyarpompa.com/en/ 32 32 BLACK BOX https://duyarpompa.com/en/urun/black-box/ Mon, 27 Feb 2023 19:04:02 +0000 https://duyarpompa.com/urun/black-box/ Definition

● Made of High Density Polyethylene (HDPE) material
● Cabin volumes of different sizes and capacities (50 It - 1000 It),
● Compact system design that increases pump life and efficiency,
● Body with strength calculations according to the place of use,
● Panel with pressure-resistant hose and camlock connection for submersible pumps,
floater connection slots are ready,
● Integrated basket filter (twin body models only)
● Above ground or below ground installation possibility,
● It is the easiest and cost-efficient to install, maintain and operate compared to pumping
stations made of concrete.
● Highly resistant material against corrosive substances,
● Suitable for single or two pumps depending on cabin volume and pump size,
● Possibility of different connection diameters upon request

Usage areas

● Suyu bir yerden başka bir yere pompalamak için pompaları ve ekipmanlarını içeren bir sistemdir.
● Su temini, su ve atık su arıtma tesisleri ve kanalizasyon sistemleri gibi çeşitli sistemler için kullanılır.
●Betonarme gövdeli sistemlerdeki kurulum, bakım, işletme maliyetinden tamamen
kurtaran Paket Pompa İstasyonları, kompakt gövde tasarımı ile sahadaki inşaat işlerini
minimize ederken, işletim maliyetini düşürmektedir.

Usage places

● In the parking lots of buildings, restaurants and cafeterias where hygiene is required.
● Projects where manhole use is not suitable

       

BLACK BOX yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>

Cubilia vestibulum interdum nisl a parturient a auctor vestibulum taciti vel bibendum tempor adipiscing suspendisse posuere libero penatibus lorem at interdum tristique iaculis redosan condimentum a ac rutrum mollis consectetur. Aenean nascetur vehicula egestas a adipiscing a est egestas suspendisse parturient diam adipiscing mattis elementum velit pulvinar suscipit sagittis facilisis facilisi tortor morbi at aliquam.

Netus nisi volutpat donec condimentum nunc eu sem odio condimentum hendrerit nisl mollis scelerisque ad vitae a eu.

Etiam dictumst congue a non class risus sed a. Diam adipiscing a condimentum in a nisl a maecenas libero pharetra tincidunt phasellus justo molestie bibendum. Vestibulum penatibus vestibulum lobortis vehicula euismod a platea taciti a eget in nec cum eget curabitur justo id enim mi velit at cum. Eu amet ut elit a sociis himenaeos eros nunc at pharetra magna suscipit.

SAGITTIS MALESUAD

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

NISI VOLUTPAT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

LITORA PARTURIENT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

TRISTIQUE IACULIS

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

BLACK BOX yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> OPUS Frequency Converter Circulation Pump https://duyarpompa.com/en/urun-kategori/circulation-pumps/opus-frequency-converter-circulation-pump/ Fri, 19 Aug 2022 20:12:30 +0000 https://duyarpompa.com/?post_type=product&p=17318 TEKNİK ÖZELLİKLER ÜRÜN ÖZELLİKLERİ İlave Ekipmanlar PERFORMANS EĞRİLERİ Teknik Özellikler Akışkan Sıcaklığı : -10/110 °C Şebeke Bağlantısı : 1~230 V,

OPUS Frequency Converter Circulation Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
TEKNİK ÖZELLİKLER
ÜRÜN ÖZELLİKLERİ
İlave Ekipmanlar
PERFORMANS EĞRİLERİ

Teknik Özellikler

  • Akışkan Sıcaklığı
: -10/110 °C
  • Şebeke Bağlantısı
: 1~230 V, 50 Hz
  • Koruma Sınıfı
: IP 44
  • İzolasyon Sınıfı
: F
  • Max. Çalışma Basıncı 
: 10 Bar



opus 65 12

Ürün Özellikleri

Stok Kodu
Model
Enerji Verimlilik
Endeksi (EEI)
Motor Gücü (W)
Nominal
Bağlantı Çapı
Flanş Arası
Mesafe (mm)
153-0102
OPUS 40-12 250
≤ 0,23
460
DN40
250
153-0102
OPUS 40-15 250
≤ 0,23
630
DN40
250
153-0102
OPUS 50-12 280
≤ 0,23
540
DN50
280
153-0102
OPUS 50-15 280
≤ 0,23
640
DN50
280
153-0102
OPUS 65-12 340
≤ 0,23
780
DN65
340
153-0102
OPUS 65-15 340
≤ 0,23
1000
DN65
340
153-0102
OPUS 80-12 360
≤ 0,23
1000
DN80
360
153-0102
OPUS 80-15 360
≤ 0,23
1250
DN80
360

İlave Ekipmanlar

Stok Kodu
Model
Özellikler
153-0200-MODBUS RTU MODUL
MODBUS RTU MODUL
RS 485
153-0300-01-ISI Y.CEKETI
ISI YALITIM CEKETI
DN 25-32-40
153-0300-02-ISI Y.CEKETI
ISI YALITIM CEKETI
DN 50-65-80 VE IKIZ POMPALAR

Performans Eğrileri

opus 65 1
opus 65 2
opus 65 3
opus 65 4
opus 65 5
opus 65 6
opus 65 7
opus 65 8

OPUS Frequency Converter Circulation Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DIP Line Type Circulation Pump https://duyarpompa.com/en/urun/dip-line-type-circulation-pump/ Fri, 19 Aug 2022 19:28:38 +0000 https://duyarpompa.com/?post_type=product&p=17308 Pressing Flange  DN 32 - DN 250 Flow 500 m3/h Pressing Height 100 m Frequency Three-phase 50 Hz - 60 Hz Fluid Temperature From -25 C to +140 C Maximum Working Pressure 10 bar (16 bar)

       

DIP Line Type Circulation Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>

PUMP TECHNICAL SPECIFICATIONS

  • Monoblock centrifugal pumps that can be connected to a straight pipe (line type), snail, single-stage, closed-type.
  • Suction and discharge flanges comply with TS EN 1092 - 2 / PN 16.
  • For pumps with steel or stainless steel body materials, the flanges comply with TS EN 1092 - l/PN 16.
  • Upon request, ANSI /ASME flanged production can also be made.
  • The pumps are used with electric motors in high efficiency class suitable for IEC structure sizes.
  • All impellers are dynamically or statically balanced in accordance with ISO 1940 class 6.3.
  • The axial force is balanced by the impeller balancing holes system.
  • Optionally, the pumps can be manufactured with wear rings and/or shaft bushings.
  • The direction of rotation is clockwise when viewed by the motor.

DIP Line Type Circulation Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP GR Series Waste Water Pump https://duyarpompa.com/en/urun-kategori/waste-water-pumps/dwwp-gr-series-waste-water-pumps Sat, 13 Aug 2022 19:00:27 +0000 https://duyarpompa.com/urun/dwwp-gr-serisi-atik-su-pompalari/ MALZEME ÖZELLİKLER TEKNİK ÖZELLİKLER POMPA ÖZELLİKLERİ PERFORMANS EĞRİLERİ Malzeme Özellikleri Pompa Gövdesi : GG 25 Mil : Paslanmaz Çelik Çark

DWWP GR Series Waste Water Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: GG 25
  • Mil
: Paslanmaz Çelik
  • Çark
: GG 25
  • Sıvı Sıcaklığı
: 0 – 40 °C
  • Koruma Sınıfı
: IP 68
  • Mekanik Salmastra
: Silisyum

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHZ d/dGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKG
DWWP GR   50-160- 1,5 kw M1,5238050 29002"30026345738
DWWP GR   50-160- 2,5 kw M2,2338050 29002"30023645740
DWWP GR 50-200- 3 kw M3438050 29002"35028749652
DWWP GR 50-200- 4 kw M4538050 29002"35029050158

Pompa Özellikleri

TİP
PANO
AÇIK ÇARK
KAPALI ÇARK
BIÇAKLI
PASLANMAZ
(AISI 304 INOX)
DÖKÜM ÇARK
(GG25)
NORYL
ÇARK
TERMİK
KORUMA
DWWP GR 50-160- 1,5 kw T
 
✓
 
✓
 
✓
 
 
DWWP GR 50-160- 2,2 kw T
 
✓
 
✓
 
✓
 
 
DWWP GR 50-200- 3 kw T
 
✓
 
✓
 
✓
 
 
DWWP GR 50-200- 4 kw T
 
✓
 
✓
 
✓
 
 

Performans Eğrileri

DWWP GR serisi egri 1

Cubilia vestibulum interdum nisl a parturient a auctor vestibulum taciti vel bibendum tempor adipiscing suspendisse posuere libero penatibus lorem at interdum tristique iaculis redosan condimentum a ac rutrum mollis consectetur. Aenean nascetur vehicula egestas a adipiscing a est egestas suspendisse parturient diam adipiscing mattis elementum velit pulvinar suscipit sagittis facilisis facilisi tortor morbi at aliquam.

Netus nisi volutpat donec condimentum nunc eu sem odio condimentum hendrerit nisl mollis scelerisque ad vitae a eu.

Etiam dictumst congue a non class risus sed a. Diam adipiscing a condimentum in a nisl a maecenas libero pharetra tincidunt phasellus justo molestie bibendum. Vestibulum penatibus vestibulum lobortis vehicula euismod a platea taciti a eget in nec cum eget curabitur justo id enim mi velit at cum. Eu amet ut elit a sociis himenaeos eros nunc at pharetra magna suscipit.

SAGITTIS MALESUAD

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

NISI VOLUTPAT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

LITORA PARTURIENT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

TRISTIQUE IACULIS

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

DWWP GR Series Waste Water Pump yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP C and C1 Series Closed Impeller Waste Water Pumps https://duyarpompa.com/en/urun-kategori/waste-water-pumps/dwwp-c-and-c1-series-closed-impeller-waste-water-pumps/ Sat, 13 Aug 2022 18:00:43 +0000 https://duyarpompa.com/urun/dwwp-c-ve-c1-serisi-dokum-govdeli-kapali-carkli-atik-su-pompalari/ MALZEME ÖZELLİKLER TEKNİK ÖZELLİKLER POMPA ÖZELLİKLERİ PERFORMANS EĞRİLERİ Malzeme Özellikleri Pompa Gövdesi : GG 25 Mil : Paslanmaz Çelik Çark

DWWP C and C1 Series Closed Impeller Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: GG 25
  • Mil
: Paslanmaz Çelik
  • Çark
: GG 25
  • Sıvı Sıcaklığı
: 0 – 40 °C
  • Koruma Sınıfı
: IP 68
  • Salmastra
: Mekanik

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHZd/dGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKG
DWWP C1 50-200- 0,75 kw T0,7513805015002"350280438
DWWP C1 50-200- 1,1 kw T1,11,53805015002"350290483
DWWP C1 50-200- 1,5 kw T1,523805015002"350290483
DWWP C1 80-160- 1,5 kw T1,523805015003"31028454058
DWWP C1 80-200- 2,2 kw T2,233805015003"35031657360
DWWP C1 80-200- 3 kw T343805015003"35031657364
DWWP C1 100-240- 4 kw T453805015004"34539590882
DWWP C1 100-240- 5,5 kw T5,57,53805015004"376395657104
DWWP C1 100-270- 7,5 kw T7,5103805015004"426470678126
DWWP C1 100-270- 8,8 kw T8,8123805015003"426470678126

Pompa Özellikleri

TİP
PANO
AÇIK ÇARK
KAPALI ÇARK
BIÇAKLI
PASLANMAZ
(AISI 304 INOX)
DÖKÜM ÇARK
(GG25)
NORYL
ÇARK
TERMİK
KORUMA
DWWP C1 50-160- 0,75 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 1,1 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 1,5 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 2,2 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-200- 3 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-200- 4 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 80-200- 3 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 80-200- 4 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 100-240- 5,5 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 100-240- 7,5 kw T
 
 
✓
 
 
✓
 
 

Performans Eğrileri

c1 1
c1 2
c1 3

Cubilia vestibulum interdum nisl a parturient a auctor vestibulum taciti vel bibendum tempor adipiscing suspendisse posuere libero penatibus lorem at interdum tristique iaculis redosan condimentum a ac rutrum mollis consectetur. Aenean nascetur vehicula egestas a adipiscing a est egestas suspendisse parturient diam adipiscing mattis elementum velit pulvinar suscipit sagittis facilisis facilisi tortor morbi at aliquam.

Netus nisi volutpat donec condimentum nunc eu sem odio condimentum hendrerit nisl mollis scelerisque ad vitae a eu.

Etiam dictumst congue a non class risus sed a. Diam adipiscing a condimentum in a nisl a maecenas libero pharetra tincidunt phasellus justo molestie bibendum. Vestibulum penatibus vestibulum lobortis vehicula euismod a platea taciti a eget in nec cum eget curabitur justo id enim mi velit at cum. Eu amet ut elit a sociis himenaeos eros nunc at pharetra magna suscipit.

SAGITTIS MALESUAD

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

NISI VOLUTPAT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

LITORA PARTURIENT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

TRISTIQUE IACULIS

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

DWWP C and C1 Series Closed Impeller Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> Expansion Tank https://duyarpompa.com/en/urun/expansion-tank/ Thu, 11 Aug 2022 20:34:54 +0000 https://duyarpompa.com/urun/genlesme-tanki/ When the water heats up, it expands, and the expanding water causes the pressure in the closed heating systems in which it is located to increase. Over time, the pressure increases even more and various fluctuations occur. If the water that expands with an increase in temperature is not controlled, it causes leaks in the pipes, boiler and heating system, which leads to a malfunction of the system. The device designed to block pressure and possible dangers is called an expansion tank. The expansion tank acts as a “mediator” between the increased heat pressure and the heating system. Mediator is a kind of "mediator" between the expansion tank and the heating system. It allows the temperature to be controlled, reduces the pressure in the system, balances it and helps the system to operate at the desired performance. Nowadays, there is an expansion tank in every boiler room. Expansion tanks equalize the pressure in the system. It is a small tank divided into two parts by a rubber diaphragm. The system works as follows; when hot water enters the heating system, the pressure in the system increases. As this pressure increases, the diaphragm located in the expansion tank is pushed down. Thus, the air in the tank is trapped and a space is created for excess water to enter. Excessive pressure in the system is reduced and thus damage to the pipes is prevented.

       

Expansion Tank yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>

What are the Factors to be Considered While Choosing the Expansion Tank?

Factors to consider when determining the exp

ansion tank for a system includes the following points;

  • Temperature of the liquid
  • Liquid type
  • The size 

    of the tank.

Stainless Expansion Tank can be used for environments where hygiene is important or it is very humid. There are expansion tanks in different sizes according to the characteristics of their pump system. The volume of the expansion tank varies between 25-5000 Liters and 10-25 bars. There are also types of tanks such as sphere, cylinder, horizontal and vertical. On average, pressure vessels last about 5-7 years. The following issues should be considered when purchasing an expansion tank;

  • Capacity (Liters)
  • Height of the place to be used
  • Compression strength
  • Auxiliary equipment to work with the expansion tank

The total volume calculation of the membrane tank can be practically done according to DIN 1988 part 3 as follows;

0.33 = Constant coefficientformul
Qmax = Maximum flow rate of the booster system
Pa = Booster operating upper pressure
ΔP (a-e) = Booster operating differential;
the difference between the operating upper pressure and the lower pressure
S = Number of switchgear; Number of activation and deactivation of the booster system per hour

Expansion Tank yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP SS Series Complete Stainless Waste Water Pumps https://duyarpompa.com/en/urun/dwwp-ss-series-complete-stainless-waste-water-pumps/ Thu, 11 Aug 2022 20:27:03 +0000 https://duyarpompa.com/urun/dwwp-ss-serisi-komple-paslanmaz-atik-su-pompalari/ Description:

Cast body, 1450 RPM, outlet diameter DN 100 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

       

    

DWWP SS Series Complete Stainless Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: INOX
  • Mil
: AISI 304 INOX
  • Çark
: AISI 304 INOX
  • Sıvı Sıcaklığı
: 0 – 30 °C
  • Koruma Sınıfı
: IP 68
  • İzolasyon
: CI.F
  • Kablo Uzunluğu
: 10 m
  • Mekanik Salmastra
: Silisyum

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHzAd/dKAPASİTÖRGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKGm3/h38121620
ufVc
DWWP SS   C 15- 1,5- 1,1 kw M1,11,5220506,229002545011/218526035020,5mss16,514117,5 

Pompa Özellikleri

TİP
PANO
AÇIK ÇARK
KAPALI ÇARK
BIÇAKLI
PASLANMAZ
(AISI 304 INOX)
DÖKÜM ÇARK
(GG25)
NORYL
ÇARK
TERMİK
KORUMA
DWWP SS C 15-
1,5-1.1 kw M
✓
 
✓
 
✓
 
 
 

Performans Eğrileri

DWWP SS serisi egri

DWWP SS Series Complete Stainless Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP V Series Waste Water Pumps With Cast Body https://duyarpompa.com/en/urun/dwwp-v-series-waste-water-pumps-with-cast-body/ Thu, 11 Aug 2022 19:59:44 +0000 https://duyarpompa.com/urun/dwwp-v-serisi-dokum-govdeli-atik-su-pompalari/ Description:

Cast body, 1450 RPM, outlet diameter DN 100 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

       

    

DWWP V Series Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: GG 25
  • Mil
: Paslanmaz Çelik
  • Çark
: GG 25
  • Sıvı Sıcaklığı
: 0 – 40 °C
  • Koruma Sınıfı
: IP 68
  • Salmastra
: Mekanik

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHZd/dGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKG
DWWP V 50-160- 0,75 kw T0,7513805029002"25530043029
DWWP V 50-160- 1,1 kw T1,123805029002"25530043034
DWWP V 50-160- 1,5 kw T1,523805029002"26330047538
DWWP V 50-160- 2,2 kw T2,233805029002"26330047541
DWWP V 50-200- 3 kw T343805029002"30035052454
DWWP V 50-200- 4 kw T453805029002"31035052959
DWWP V 80-160- 1,5 kw T1,523805015003"31028454058
DWWP V 80-200- 2,2 kw T2,233805015003"35031657358
DWWP V 80-200- 3 kw T343805015003"35031657362
DWWP V 100-240- 4 kw T453805015004"39534760880
DWWP V 100-240- 5,5 kw T5,57,53805015004"395375657101
DWWP V 100-240- 7,5 kw T7,5103805015004"425470678123
DWWP V 100-240- 8,4 kw T8,8123805015004"425470678123

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHZd/dGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKG
DWWP V 50-160- 0,75 kw T0,7513805029002"25530043029
DWWP V 50-160- 1,1 kw T1,123805029002"25530043034
DWWP V 50-160- 1,5 kw T1,523805029002"26330047538
DWWP V 50-160- 2,2 kw T2,233805029002"26330047541
DWWP V 50-200- 3 kw T343805029002"30035052454
DWWP V 50-200- 4 kw T453805029002"31035052959
DWWP V 80-160- 1,5 kw T1,523805015003"31028454058
DWWP V 80-200- 2,2 kw T2,233805015003"35031657358
DWWP V 80-200- 3 kw T343805015003"35031657362
DWWP V 100-240- 4 kw T453805015004"39534760880
DWWP V 100-240- 5,5 kw T5,57,53805015004"395375657101
DWWP V 100-240- 7,5 kw T7,5103805015004"425470678123
DWWP V 100-240- 8,4 kw T8,8123805015004"425470678123

Performans Eğrileri

v 1
v 2
v 3

DWWP V Series Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP C1 SERIES Waste Water Pumps With Cast Body https://duyarpompa.com/en/urun/dwwp-c1-series-waste-water-pumps-with-cast-body/ Thu, 11 Aug 2022 19:46:15 +0000 https://duyarpompa.com/urun/dwwp-c1-serisi-dokum-govdeli-atik-su-pompalari/ Description:

Cast body, 1450 RPM, outlet diameter DN 50 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

       

    

DWWP C1 SERIES Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: GG 25
  • Mil
: Paslanmaz Çelik
  • Çark
: GG 25
  • Sıvı Sıcaklığı
: 0 – 40 °C
  • Koruma Sınıfı
: IP 68
  • Salmastra
: Mekanik

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİPMOTORPOMPA
KWHPVHZd/dGİRİŞ
ÇIKIŞ		W
mm		L
mm		HKG
DWWP C1 50-200- 0,75 kw T0,7513805015002"350280438
DWWP C1 50-200- 1,1 kw T1,11,53805015002"350290483
DWWP C1 50-200- 1,5 kw T1,523805015002"350290483
DWWP C1 80-160- 1,5 kw T1,523805015003"31028454058
DWWP C1 80-200- 2,2 kw T2,233805015003"35031657360
DWWP C1 80-200- 3 kw T343805015003"35031657364
DWWP C1 100-240- 4 kw T453805015004"34539590882
DWWP C1 100-240- 5,5 kw T5,57,53805015004"376395657104
DWWP C1 100-270- 7,5 kw T7,5103805015004"426470678126
DWWP C1 100-270- 8,8 kw T8,8123805015003"426470678126

Pompa Özellikleri

TİP
PANO
AÇIK ÇARK
KAPALI ÇARK
BIÇAKLI
PASLANMAZ
(AISI 304 INOX)
DÖKÜM ÇARK
(GG25)
NORYL
ÇARK
TERMİK
KORUMA
DWWP C1 50-160- 0,75 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 1,1 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 1,5 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-160- 2,2 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-200- 3 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 50-200- 4 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 80-200- 3 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 80-200- 4 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 100-240- 5,5 kw T
 
 
✓
 
 
✓
 
 
DWWP C1 100-240- 7,5 kw T
 
 
✓
 
 
✓
 
 

Performans Eğrileri

c1 1
c1 2
c1 3

DWWP C1 SERIES Waste Water Pumps With Cast Body yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]> DWWP C SERIES Cast Iron Body Waste Water Pumps https://duyarpompa.com/en/urun/dwwp-c-series-cast-iron-body-waste-water-pumps/ Thu, 11 Aug 2022 19:16:35 +0000 https://duyarpompa.com/urun/dwwp-c-serisi-dokum-govdeli-atik-su-pompalari/ Description:

Cast body, 1450 RPM, outlet diameter DN 50 and DN 80, closed impeller, three-phase, centrifugal submersible sewage pumps. In this type of pumps, a greased sealed bearing is used.

Usage Areas:

Used in domestic and industrial raw wastewater processes and liquids containing solid and fibrous parts.

       

    

DWWP C SERIES Cast Iron Body Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>
MALZEME ÖZELLİKLER
TEKNİK ÖZELLİKLER
POMPA ÖZELLİKLERİ
PERFORMANS EĞRİLERİ

Malzeme Özellikleri

  • Pompa Gövdesi
: GG 25
  • Mil
: Paslanmaz Çelik
  • Çark
: GG 25
  • Sıvı Sıcaklığı
: 0 – 40 °C
  • Koruma Sınıfı
: IP 68
  • Salmastra
: Mekanik

Teknik Özellikler

POMPA TEKNİK ÖZELLİKLERİ
TİP MOTOR POMPA
KW HP V HZ d/d GİRİŞ ÇIKIŞ W mm L mm H KG
DWWP C1 50-160- 0,75 kw T 0,75 1 380  50  2900  2"  300 300  430  32
DWWP C1 50-160- 1,1 kw T 1,1 1,5 380 50 2900 2" 300 300 430 34
DWWP C1 50-160- 1,5 kw T 1,5 2 380 50 2900 2" 300 300 475 39
DWWP C1 50-160- 2,2 kw T 2,2 3 380 50 2900 2" 300 300 475 41
DWWP C1 50-200- 3 kw T 3 4 380 50 2900 2" 350 350 524
DWWP C1 50-200- 4 kw T 4 5,5 380 50 2900 2" 350 350 529
DWWP C1 80-200- 3 kw T 3 4 380 50 2900 3" 350 315 573 59
DWWP C1 80-200- 4 kw T 4 5,5 380 50 2900 3" 350 325 578 65
DWWP C1 100-240- 5,5 kw T 5,5 7,5 380 50 2900 4" 395 375 657 94
DWWP C1 100-240- 7,5 kw T 7,5 10 380 50 2900 4" 395 375 657 103

Pompa Özellikleri

TİPPANOAÇIK ÇARKKAPALI ÇARKBIÇAKLIPASLANMAZ
(AISI 304 INOX)		DÖKÜM ÇARK
(GG25)		NORYL
ÇARK		TERMİK
KORUMA
DWWP C 50-160- 0,75 kw T  ✓  ✓  
DWWP C 50-160- 1,1 kw T  ✓  ✓  
DWWP C 50-160- 1,5 kw T  ✓  ✓  
DWWP C 50-160- 2,2 kw T  ✓  ✓  
DWWP C 50-200- 3 kw T  ✓  ✓  
DWWP C 50-200- 4 kw T  ✓  ✓  
DWWP C 80-200- 3 kw T  ✓  ✓  
DWWP C 80-200- 4 kw T  ✓  ✓  
DWWP C 100-240- 5,5 kw T  ✓  ✓  
DWWP C 100-240- 7,5 kw T  ✓  ✓ 

Performans Eğrileri

DWWP C serisi egri
DWWP C serisi egri2

DWWP C SERIES Cast Iron Body Waste Water Pumps yazısı ilk önce Duyar Pompa üzerinde ortaya çıktı.

]]>